Scotch® 1210590

Scotch® contractor-grade masking tape is a general purpose masking tape designed for use on non-damageable surfaces. Use on vinyl, carpet, metal and plastic for the protection you need to get the job done. Scotch® contractor-grade masking tape holds to surfaces for up to three days and then removes easily without leaving any sticky residue behind. For great paint results, make sure the surface is clean, dry and dust-free so that the tape sticks properly. Next, apply the Scotch® contractor-grade masking tape onto the surface while pressing down firmly as you go. Let the tape set for about 30 to 60 minutes before painting for an optimal bond. Once finished painting, make sure the paint is completely dry before removing the tape. To properly lift it up, start by slowly pulling the tape back on itself before removing at a 45 deg angle.

Scotch® Contractor-Grade Masking Tape Roll, 1.41 in Width, 60.1 yd Length, Tan, Rubber Adhesive, 50 deg C, 20 in-lb Tensile Strength