UP TO 35% OFF SELECT BRANDS + $400 Instant Savings
Contact 336-599-1135
DAP® concrete and mortar filler and sealant is a ready-to-use, waterproof sealant formulated to repair cracks and holes in concrete, mortar and masonry surfaces. It contains silicone additives for improved adhesion, flexibility and water-resistance. It forms a durable, 100% waterproof and weather-proof seal. Resists gas, oil, grease and salt. Paintable. Easy to apply, low in odor and water clean-up. VOC compliant. Interior/exterior use.
DAP® Sealant, 10.1 fl-oz Net Content, Cartridge Container, Paste Form, Gray, Odor/Scent: Very Slight Ammonia, Composition: 30 to 60% Limestone, 3 to 7% Lubricating Petroleum Oil, 1 to 5% Petroleum Distillates, 1 to 5% Solvent ref Light Paraffinic, 0.1 to 1% Glycol Ethers, Acrylic Latex Base, 7 to 14 days Dry Time, 55 linear ft Coverage Area, 7 to 12 pH pH, 100 deg C Boiling Point, >212 deg F Flash Point, Density: 1.56 to 1.57 g/cc, Applicable Materials: Concrete, Mortar, Masonry, Stone, Brick, Wood, Stucco, Most Common Building Materials, Cinderblock, Most Metals, 12 months Shelf Life
| Applicable Materials | : | Concrete, Mortar, Masonry, Stone, Brick, Wood, Stucco, Most Common Building Materials, Cinderblock, Most Metals |
| Base Type | : | Acrylic Latex |
| Boiling Point | : | 100 deg C |
| Color | : | Gray |
| Composition | : | 30 to 60% Limestone, 3 to 7% Lubricating Petroleum Oil, 1 to 5% Petroleum Distillates, 1 to 5% Solvent ref Light Paraffinic, 0.1 to 1% Glycol Ethers |
| Container Type | : | Cartridge |
| Coverage Area | : | 55 linear ft |
| Density | : | 1.56 to 1.57 g/cc |
| Dry Time | : | 7 to 14 days |
| Flash Point | : | >212 deg F |
| Form | : | Paste |
| Net Content | : | 10.1 fl-oz |
| Odor/Scent | : | Very Slight Ammonia |
| Shelf Life | : | 12 months |
| pH Range | : | 7 to 12 pH |